tec diving courses

course

duration

price

DSAT Discover Tec lets you try technical diving equipment and procedures in shallow water. It's a great experience, very different and a lot of fun too.

If you're interested in technical diving, but haven't yet met the prerequisites for the PADI Tec 50 Diver course or PADI Tec 45 course, you can consider enrolling in the PADI Tec 40 course.

In this course you will learn the basics of decompression diving. You will learn to use the new kit, plan and run a decompression dive.

The Tec 45 course picks up where Tec 40 leaves off and  takes your training as a tec diver further and deeper. It is the second sub-course in the full PADI Tec Diver course.

This course builds on your knowledge of Nitrox and allows you to use Nitox during deco stops to accelerate your decompression. This course will qualify you to use Nitrox mixes up to 80% and to a depth of 45m.

The Tec 50 course completes your training as an entry-level tec diver, taking you past the limits of recreational diving.

This course combines all three levels of Tec 40, Tec 45 and Tec 50. It's the route that most divers take, as long as they meet the entry requirements and are sure of their commitment!

This course teaches you to safely use Trimix mixtures up to 20% oxygen and 30% helium to help reduce the effects of nitrogen narcosis during deeper dives. This course also expands your depth experience to 50m.

The PADI Tec Trimix 65 course is intended to extend the depth range of technical divers already trained and qualified to use air, enriched air and oxygen for technical decompression dives beyond 50 metres /165 feet.

This course opens up the advantages of Trimix to the diver, and divers are qualified to make multi-stop decompression dives that employ EANx and oxygen for accelerated decompression, and any Trimix with an oxygen content of 18% or more. They can dive to a maximum depth of 65 metres/210 feet.

The BSAC Explorer Mixed Gas Diver is an extension to the Sports Mixed Gas Diver and allows you to increase your depth experience to 60m breathing Trimix mixtures up to 18% oxygen and 35% helium.

The PADI Tec Trimix Diver course is intended to extend the depth range of technical divers already trained and qualified to use air, enriched air and oxygen for technical decompression dives beyond 50 metres/165 feet.

This course opens up the advantages of trimix to the diver, and divers are qualified to make multi-stop decompression dives that employ EANx and oxygen for accelerated decompression, and any trimix with an oxygen content of 18% or more. They can dive to a maximum depth of 75 metres/245 feet.

This course is designed to give you instruction in filling diving cylinders from high pressure gas sources, covering all relevant safety knowledge.

The Gas Blender Course is split into two separate courses. These courses are, the BSAC Nitrox Blender course and the Mixed Gas Blender course. Although it is not entirely essential for this blending course, it is recommended that you should have attended the BSAC Compressor Operation course prior to this course.

The Gas Blender course will train you as a qualified gas blender, allowing you to provide gas mixes to appropriately certified consumers. Although it is not entirely essential for this blending course, it is recommended that you should have attended the BSAC Compressor Operation course prior to this course.